PIXCI® E4DB

Features Specs Selection Guide Manual Pricing
Software
XCAP XCLIB PXIPL
Optional
TTL Module
PDF

Dual Base Camera Link Frame Grabber For PCI Express

Supports One or Two Base Configuration Camera Link Cameras
PCI Express x4 Bus Compatible
1 GB/sec Burst Data Transfers
700 MB/sec Sustained Data Transfer
Line Scan or Area Scan Camera
Frame Rate Sequence Capture
Triggered Image Sequence Capture
64-Bit Memory Addressing
Camera Integration & Async Reset Control
Integration From Microseconds to Minutes
Images Stored in Motherboard Memory or RAID Array
Compatible with Windows XP, 2000, & Linux
RoHS Compliant

The PIXCI® E4DB frame grabber connects two Base camera link cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX’ software as if two PIXCI E4 boards are installed. The E4DB will accept two trigger signals — one for each camera; or allows a single trigger to control capture from both cameras. A strobe output signal is generated for each trigger. The PIXCI E4DB frame grabber supports two cameras with a combined sustained bandwidth up to 700 MB/second. Compatible with the PCI Express x4 bus, the PIXCI E4DB frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available.

The PIXCI E4DB and XCAP offers:

1 GB/sec burst data transfer rate.
Up to 700 MB/sec sustained data transfer from cameras to x4 PCI Express bus.
Two Camera Control Dialogs - independent or shared – exposure, bit depth, gain, frame rate, etc.
Free-run mode for maximum frame rate sequence capture.
Control mode for triggered image capture.
Quantity one price $1595.00 with XCAP-Lite imaging program.

The PIXCI E4DB is a plug-n-play frame grabber requiring no hardware setup or adjustment. Load the software, install the board, connect the cameras, and begin to capture images.

The XCAP imaging program supports up to 4 PIXCI E4DB frame grabbers allowing use of eight Base configuration Camera Link cameras in the same computer. The XCAP-Std program allows simultaneous use of the PIXCI E4DB with other EPIX® frame grabbers supporting different camera models, either Camera Link compatible or not. XCAP-Std also offers video-to-disk capture, subject to the performance of the host computer’s RAID array.

Programmer’s libraries and image processing subroutines are available from EPIX, Inc. for solving the most difficult particle tracking, machine vision measurement, inspection, image sequence analysis, and flow analysis tasks. Third party software is also available.

Solutions and Support: EPIX, Inc. has been providing imaging solutions and support for OEM machine vision manufacturers and engineers since 1984. EPIX, Inc. assembles complete imaging systems with cameras, frame grabbers, high- performance PCI Express buses, and with RAID arrays for video-to-disk capture. EPIX® imaging systems, custom-built to your specifications, feature Intel motherboards and processors. Contact EPIX, Inc., or an authorized distributor of EPIX® imaging products, for help selecting cameras, frame grabbers, imaging software, optics, and computer systems.

Featured In:

PRICING

PIXCI® E4DB - PCI Express x4 Interface for Camera Link cameras.
	`E4DB-`		Enter your camera model or the specific order code from the full price list for customized default camera controls. Boards ordered with customized controls may still be used with other Camera Link cameras.	$1595.00
	`E4DB-`	`GENERIC`	Defaults to generic Camera Link controls. Customized controls may be selected for supported camera models.	$1595.00

Camera Link Cable

XCAP Imaging Application Software - Detailed version information.
	`XCAP-`	`LITE`	Provided with purchase of any PIXCI® imaging board. Limited to 64MB frame buffer.	$ No Charge
	`XCAP-`	`LTD`	Adds support for up to 4 GB frame buffer or 8GB on 64 bit operating systems and other features.	$495.00
	`XCAP-`	`STD`	All image processing functions available, video to disk, and other features..	$1495.00

Programming Libraries

- Single Developer, Royalty-Free Licenses. See the XCLIB and PXIPL product pages for details.

`XCLIBLITE-`	Limited to one board, 64MB RAM, 32-bit Windows.	$195.00
`XCLIB-`	Full library for interacting with all PIXCI® boards.	$495.00
`XCLIBIPL-`	Adds optional PXIPL image processing and analysis library.	$995.00
No Library

Request More Information:

Name:
Email:
Questions, comments, requirements?

All prices F.O.B. Buffalo Grove, Illinois.
USA Terms: Net 30 Days, subject to credit acceptance.
Contact EPIX Inc., or your distributor of EPIX® imaging products, for volume discounts and OEM pricing.

EPIX, SILICON VIDEO, and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCIP, XCLIB, and PXIPL are trademarks of EPIX, Inc. Other brand, product, and company names are trademarks or registered trademarks of their respective owners. Prices, terms, and specifications subject to change without notice.

Software price protection: Within 90 days of original shipment, a discount equal to the original purchase price of XCAP, XCIP, XCLIB, or XCLIB+PXIPL may be applied to a new version of the same software.

Programming libraries license a single program developer; the developed program may be reproduced without payment of royalties, as detailed in the Software License Agreement.

EPIX® imaging products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of EPIX, Inc.

Back to EPIX Products

Back to the EPIX home page

Image Processing Products For Research and Industry

Modified:
19-Jun-2008

Specifications and prices subject to change without notice.

EPIX® imaging products are made in the USA.

EPIX, SILICON VIDEO, and PIXCI are registered trademarks of EPIX, Inc. 4MIP, SVIP, XCIP, XCAP, 4MEG VIDEO, 1MEG VIDEO, SILICON VIDEO MUX, QUICK SET VIDEO, 12-7 MUX, IMAGE MEMORY EXPANSION, COC40, COC402, CL3SD, 4MOBJ, SVOBJ, XCOBJ, XCLIB, PXIPL, and XCLIBIPL are trademarks of EPIX, Inc. Other brand, product, and company names are trademarks or registered trademarks of their respective owners.